Cake tutorials

, The lady in yellow how to make

The lady in yellow how to make


    Our site has collected lessons , master classes on various websites that are dedicated cakes, cakes decoration. If you are the author of the lesson and want to supplement the information to change, exclude it from our website or have new lessons write request through the form on our website We will consider all your ideas!

    Moulding Template Design, Cad To Acrylic Moulding Pattern - YouTube !!!
    low my name is Rob
    today then demonstrated from beginning to end
    army professional cotton ball
    great today we start the drawing board drawing board
    sometimes we get samples a with the samples
    sometimes we get samples by fax sometimes we get samples by dimensions
    a today we're gonna say sample by fax
    am change it reduce it to scale it
    and see we get from there two-and-a-half by
    to the finished size of government
    it will bring his pitching to a cat sandwiches medicare is a European
    right disciplinary joins the oldest week things a little bit what we think
    it was supposed to be I remembered they called off no dimensions
    so we just a round of to the causes number this will be

    K get the basic foundation so I believe this is a
    more realistic to what the customer wanted
    animal name
    disapproval blockers with customers were getting signed a formal
    cut in the morning I everything must be approved
    to get back so after the client wait for signature
    soon because things are back World Cup a template and then move on Grindr night *** *** Template Method Design Pattern - YouTube !!!
    all internet and welcome the part
    up my design patterns video tutorial today
    we're going to talk about the template method design pattern
    it is a extremely easy design tired understanding by the end of this year
    gonna completely understand it
    like most these tutorials it's also contains certain just here to learn
    about the template not the design pattern you're in the right place
    and if you'd like to learn about all the design patterns refer to the link above
    so let's get into it so what is the template method design pattern well it's
    used to create a group of subclasses that have to execute
    a similar group of methods and to implement it you create an abstract
    class is going to contain a method called the template matter then if
    you're not getting this don't worry about the Kotel totally fell UN as well
    as the UML diagram that's coming up very quickly
    so anyway you create the abstract classes going to contain a method called
    the template method
    and the template method contains a series method calls that
    every subclass object will call however in certain situations the subclass
    objects that are formed from this guy are gonna be over to override some other
    method calls that don't work for
    let's take a look at you male doctor basically what I want to do is to two
    rows only use a fictional restaurant called the hoagie hut
    and the people that work there called Sam which sculptors well though he hot
    as decided to automate the process up creating sandwiches and they're gonna
    replace all their sandwich sculptor so it's our job to make it all happen now
    this guy right here
    makes am which that is the template method and it's going to execute a whole
    bunch of different methods
    and hear those methods are cut by one at me add cheese add veggies
    rapidly and give it to the customer and what we're gonna do as well implement
    things called
    books now we want to make a sammich doesn't contain meat
    right here we're gonna set this boolean value to false
    over in
    the subclasses that's going to implement
    this abstract class called hoagie and we're gonna over here saying that we
    don't wanna at meat or veggies or cheese or what have you two are okay
    and that's going to automatically void out olive the methods that are contained
    within this
    template method called make sammich so it's getting the code and show you
    exactly how to implement this time
    okay so only had it once replace all the same which sculptures so what are some
    ways that we can do that well first off we're gonna have to come in here and
    start implementing our classes that are going to represent our sandwiches now
    the first thing I'm gonna do here
    is not going to be a good way to solve this problem but I'm gonna do it just so
    that we know how to do it souls go in here
    I would say all right we need to make Italian hoagies well the bad way to do
    this is just a start bouncing around here
    and start implementing exactly how we would want to make one of these
    we could say something like make sandwich rate this method here
    and then say something like cut bon add me
    and all the code here is available under this video and you should definitely
    check it out if you wanna completely understand how to implement this design
    add that into bowls add call on demands
    and then wrap though okie okay so no matter what type of girl you we make and
    biochemists am much
    submarine where we were for last everything was going to have a
    kuttab on and wrap that thang up now these things however going to different
    that's going to be one of the reasons why this design
    here is not gonna work and then what we do is do something like public void cut
    bon and then do something like system I'll
    liner the hoagie is and we would implement all of these methods that are
    defined up here
    down here and it would in the end make itself an Italian hoagie
    I think you see quite clearly why that is not a good idea because you have to
    and duplicate a tonic code and it just doesn't make sense
    however we have to also think about the problem of what happens whenever this
    becomes a veggie hoagie
    all of a sudden we are not going to be at me cheese and maybe not
    condiments so what we do in that situation that's where the hook part
    comes and I talked about previously
    let's just get into this and fix it up and make it look away shirt so
    change that back in one Italian hoagie then what we're going to do instead
    is going to hoagy dot Java increase our
    abstract class so we're gonna build all over hoagies from so
    cisco public abstract last
    bogey ans this is going to be are
    template method and its declared as finally keep subclasses from changing
    the algorithm
    because we know how we want to make our sandwiches and we don't want
    are same which stalker to have any import at all in regards to how to do so
    so what we gonna do well we know every single one tomorrow he's going to have a
    bond that's not for the customer to determine no we're not going to put the
    meat and cheese right in their hand all around the head that way
    and then what are we gonna do well we're gonna define whether our customer
    once meet remember veggie hoagie is an auction
    and words gonna put that there and then inside a bit if they do want me
    we're gonna say well at the meet and we're gonna call
    that not and then just so we don't get lost here
    outside of our template method we're gonna start on and everything so let's
    just go
    abstract Lloyd add me we're going to force them to implement this method with
    the abstract term there
    and then on top of that under here we're going to define Boolean
    customer wants meet and we're going to provide a method that can be
    overridden however doesn't need to be so the hoagie hut decides that most to
    their submarines or going to contain meat
    well it makes sense then for this to remain true and then allow all the
    sunglasses to override it
    if it is a true and this is referred to as a hawk
    that's basically just use like I said before use wants override these they can
    and whenever you're creating all these individual methods insider
    here you gonna mark anything abstract where you wanna
    force the user to override it and created as a hook whenever you want that
    to totally be optional
    and up to our User so now we have the basis of how this is going to be set up
    we can command here and fill in all our other ok sir
    options whatever you wanna call so we r say if customer once
    cheese well then add cheese
    just like that and then we're going to come down here just to keep everything
    and through that abstract class in here change that offer case
    and then change this to add cheese and then add another boolean value here
    just for once and then type in cheese like that you're basically gonna do the
    same thing for all the other potential
    pieces of our submarine sandwich or a whole year we want to call it
    so we're gonna say customer wants vegetables
    and then come down here and say add vegetables
    and then abstract add Vegeta bolts
    and then right here customer wants vegetables
    and then the final thing that's going to be an option is really come in there
    and also ask the customer if they want condiments
    where's that abstracts and on defense
    and then our boolean value Rainier a smile on Scotland's
    and they are then we can bounce appear and put in a definite
    so raft the hoagie is going to be something
    that definitely has to be done percent sorry purposes
    and then outside of our template map but we're going to define what exactly cut
    bonds gonna do
    public void cut bon paste in system I'll though
    hoagie is cut closer closer and their yes that's a method that's definitely
    going to be calm
    and then underneath so far Hawks here where we're going to define whether
    these things are going to be at a turn onto our sandwich we're gonna put in our
    other definite
    and that's gonna be public void rap the Holy
    and then in that situation we're gonna say rap though
    okay I got that week file save that night and then this guy's basically set
    ups and downs go into
    a tally in hoagie and use it the proper way with our abstract class
    so in that situation we're gonna go extends
    are abstract class okay now whatcha gonna do well let's just get rid of all
    this because now the abstract class is gonna handle making our sandwich
    and we need to implement some on implemented methods for this guy
    so there we are click on a and automatically everything's gonna pop
    insider there
    what scroll back up to the top and this has nothing to do with the template
    method design pattern but I decided I'm gonna have everything
    in regards to what's going to be on the sammich setup inside
    a string a racquet so long me pepperoni cap
    coehlo a.m. so this is going to be the basis
    over a talent hoagie and then we're going to do the same sort of thing for
    all the other ingredients that are gonna go on this okay
    you know say cheese used in this situation is real simple
    Grove alone got that in there make a mean here's a
    veggies used let us tomatoes
    onions should uppers and then finally
    condiments news and that's going to be real simple as well we're just going to
    oil manager case we have all of the things that are you know in sidebar
    Italian hoagie
    now we need to go into add me it's and make sure that everything is generated
    properly here
    so just cannot create a little message adding though
    the not only use enhanced for statement so we're gonna go string
    meet temporary holding cell for everything that's popped out over our
    me used string a racquet system.out.print
    we're gonna prenup me followed by space okay so now we pretty much have to do
    exactly the same thing
    for all these other methods inside here so
    for and cheese bounce in their adding though cheese
    men here we're gonna say cheese cheese used
    and she's nine come down to the vegetable or ace that their
    adding though veggies veggie and then here we got taken veggie
    name and the last one and condiments for that matter
    adding though condiments on-demand condiments use
    in common there we go looks like that's all good
    yeah no heirs so that is going to be the basis
    are Italian hoagie so now we basically have two
    I was gonna copy all is to save some time and jump over into
    veggie hoagie this is going to be the guy that's dramatically different
    paste electrode in there in a minute change this the veggie hoagie
    and down here we don't have cheese on a Reggio gate
    we don't have to meet on our video you but we are going to have the edges of
    the isley as well as condiments
    and then just to keep this me because it makes more sense in this situation
    I need to override the customer wants me
    and the customer wants cheese that's found over in who viewed our job to see
    right here so I'm just gonna copy these guys and among our
    override them in my veggie hoagie class that I have here
    so instead I'm not taken false and then ima they've been false here
    so overrode those now that's going to work properly and
    for these guys right here at me mad she is well
    I don't need them to do anything but I do need to implement them
    so fun I was going to get rid of everything that is inside of them
    and have them basically do nothing now we r we can do the same thing here
    we are and then in the add vegetables par guess what
    on up to do anything because I already have all those things to find up here
    of course I could change alerts in the string race but I don't see any reason
    to do that
    sleep I'll save it goes guess what we're done with that so now all that's left
    for us to do
    is to create the sandwich sculptor this is going to be ridiculously easy
    so we're in Sandwich sculptor we're in public static void main so it's time for
    us to make ourselves some same watches
    so min ago hoagie it's going to create a basic okie
    and lets a customer
    comes and it says that they want
    an Italian hoagie when I we can guarantee it's going to get made the
    right way so we're gonna go new
    Italian okie like that and then to have it
    create it presidio customer
    and then make sandwich which is a call to the template now
    that we define inside ol gaidar Java
    let's take a look at it say makes am much there is it's going to create all
    this stuff for us
    that's all we need to do and then if we have in some other customer command
    and this customer says I want a different type of movie
    I want you to make me vegetarian only no problem just gonna men here
    video gate who spot right now we are and then make sandwich
    change thirty and Free File Save that actually
    I know gonna print a little bit we're gonna fix at a second and there you can
    oh yes cut adding the me blah blah and the cheese and so forth and so on
    and then if we want to correct the spacing issue we just think you're sorta
    in Providence let's figure out how to do it
    makes the most sense to do it inside ok you know I job us let's jump in there
    and what's one quick way we can do this we can create our souls Boolean
    let's say after first condiment because we
    have no idea weather meter what sort of things are going to go on here so
    remark that is false know what ima do is insert
    new lines to make sure that all this stuff is broken operate
    so cut bond the man wanna do
    is if they're is meet on the hoagie communal like this
    and Mark this is true and then down here we going to the cheese partner this has
    nothing to do with the template method
    design pattern I'm just fixing out little bit of an issue here
    in here I'm going to ruined and ask if
    I've already paste and the meat part love this and if I did
    gonna throw new liner print for a new line I can adjust
    print print line but whatever and then after that
    gonna pop this inner point this can be your own work for you know exactly what
    I'm doing here
    if you don't quite get it I'll save that in them to do the same thing here
    and do the same thing I can imagine somebody coming in or Yahoo login just
    getting compliments but I guess it's a possibility
    and then we r
    save that then jump back over in the same which sculptured
    of Java
    then we can bounce over here throw in a print line between each of these guns
    and execute it not sure perfectly and there you can see it worked perfectly
    prints out cut though he adds all the me adds the cheese as the veggies that the
    condiments wraps the Holy
    and on here in this situation when are we don't have meat and cheese
    just prints out veggies and condiments and wraps at Aggie so
    there is the template method designed matter
    leave any questions or comments below the last the next on *** *** Mirror Frame Pt. 1: Design, Half-Laps, Assembly, & Curves - YouTube !!! English English
    - On today's show we're gonna take a little time for some
    personal reflection as we build this simple, elegant mirror.
    (groovy music)
    The design of our mirror frame is pretty straightforward
    but let me show you a couple of details I really like.
    First off, the side piece. It goes all the way to the top.
    Now we've got that nice, graceful curve in the top rail
    but it continues right on through that side piece,
    through the end grain, and gives it a nice,
    smooth, continuous look.
    If you look between each piece
    you'll see there's a little V groove there.
    Now that V groove is just a optional detail.
    If you don't like it you don't have to put it there.
    But I think it gives the piece a little bit more visual
    interest, it makes each individual part of the frame
    pop a little bit more.
    And we're gonna do a finishing process later
    with a glaze that's gonna enhance that even more.
    The other thing is we've got half-lap joints here.
    This particular design I think really calls for half-laps.
    You can certainly do a mortise and tenon joint
    if you wanted to, but half-laps are pretty darn easy
    and they're very strong.
    Certainly adequate for a frame like this.
    The wood itself here is a figured maple.
    We're gonna do a staining process on it,
    and normally I don't stain my projects, especially
    for ones that are made from really expensive wood.
    But this is going into my bathroom, and it has to
    match the cabinets, or at least come close to
    matching the cabinets that are already there.
    So, stained it is.
    We've got a nice lacquer finish,
    I'll show you how I applied that.
    And at this point we need to go back in time a little bit,
    jump into the bathroom and see if we can't figure out
    the proper measurements using the wall itself in the space
    so we know exactly what we're doing with the project parts.
    All right, so, let's head to the bathroom.
    I never thought I'd say that on the show.
    So welcome to the Spagnuolo bathroom,
    and this is the wall where the mirror needs to go.
    Previously the mirror that was there
    was one of those frameless mirrors,
    and it spanned from wall to wall.
    So what we want to do now is make it a little bit
    more elegant by providing a nice wooden frame
    that fits the space fairly well.
    So, the way I'm gonna do this is using blue tape and a
    tape measure to mark the locations, get the overall size,
    and figure out what the size of parts will be.
    Blue tape is nice because you can put it on the wall
    and then rip it right off and not affect the paint.
    I'm gonna try and keep in mind the center line here
    and make sure that everything is equally distant
    from that center point, but I'm just gonna start putting
    pieces of tape in to represent what I think looks good.
    (bright music)
    So as you can see there's a lot of back and forth there,
    and yes, we're wasting some tape,
    but it's certainly cheaper than wasting wood.
    So as the layout is on the wall we can kind of get a feel
    for if I'm hitting my target or not.
    I really just want something that's nicely balanced between
    the lights at the top and the top of the surface down here.
    And I think I've hit that.
    So we can use what we have here to take measurements,
    and if we're close to a whole number, let's just use
    the whole number, we have some wiggle room here.
    So, my bottom here, if I take a look at that.
    It's about four inches, little less than four.
    And the side is three.
    And I'll tell you what, even though that's at four
    I think I'd be perfectly happy making that three
    so that it's consistent, and the bottom will be
    three inches wide, and the side will be three inches wide.
    At the top remember we've got this peak for the curve there
    so I'm thinking maybe at its tallest point it would be
    four inches, and as it tapers down, curves down
    we can bring it down to three inches,
    and whatever that curve happens to be to connect those lines
    is whatever it is.
    Now for the actual mirror dimensions we'll just take a
    measurement and see how close we are to a round number.
    I've got about
    there, which is pretty good.
    And here I've got about
    to the peak.
    We'll just write all these numbers down
    and now we can head into the shop
    and actually start to draw this out in a full size drawing.
    All I need now is my trusty drywall square, a pencil,
    and a piece of quarter inch plywood to do the drawing on.
    (bright music)
    I'm really pleased with the way that this looks.
    It's got a nice simple elegance to it.
    The proportions look good to my eye
    and I think it's gonna look really nice in the bathroom.
    Speaking of proportions, a lot of time when you design
    a piece like this you should be thinking about
    either whole number proportions, or the golden ratio,
    if you've heard of that,
    to help you decide on your relative lengths.
    In this case I'm kind of abandoning that
    because I want this to fit in a very specific location
    for a very specific purpose.
    So if I don't have some theoretical standard
    achieved with this piece, I don't really care.
    I just want to make sure it's wide enough and
    tall enough to look good in the space that it's going in.
    So in this case, functionality for me
    trumps a traditional theoretical design number.
    The other thing we should probably think about now,
    which you might think is a little early to talk about,
    and that's the mirror.
    We need to know what size the mirror should be cut to.
    If you cut the stuff yourself, good on you.
    I don't really mess with glass too much,
    so I'm gonna have a local place cut it for me.
    I'm going with quarter inch thick glass,
    so it's not really gonna warp or distort or anything.
    And we want to cut it an inch wider and taller
    than the dimensions of this interior space
    because we're gonna cut a nice rabbet around the perimeter
    and that's gonna give us the size that we need.
    So for me that's
    and a quarter tall, and
    So I just called a local glass company and said,
    "Hey, here's the measurements."
    The key is I wanna make sure I have that glass in the shop
    before I finalize this internal cut on the frame.
    So I've got a little work to do before we get to that point
    and it's a good time to place that order.
    If you've ever done a project with half-laps you know that
    it's a real pain in the butt to glue those things together,
    but we can make some choices now that will
    actually make the glue up a whole lot easier.
    So, cut your parts a
    than the plans call for, and you'll see why
    a little bit later when it comes time for clamping.
    All right, so, let's start rough cutting some wood.
    I like to use the bandsaw for ripping rough stock.
    It's much safer than the table saw,
    and I'm not worried about the cut quality at this point.
    The chop saw is an excellent tool
    for rough cutting to length.
    Now everything is milled to final dimension
    according to the plans.
    With regard to thickness the plans call for
    of an inch
    but if you can keep your stock thicker, go for it.
    Heavily figured maple is prone to tearout but the
    segmented head in the planer really does a nice job.
    Remember to cut these pieces a
    So that's three and a 16th for the sides and bottom,
    and four and a
    At the chop saw I use a stop block to make sure
    that the sides, and the top and bottom pieces
    are cut to their respective lengths.
    Now once everything is milled up
    it's a good idea to lay out your parts
    and get a feel for how these half-laps are gonna lay out.
    I've got my sides here, the top and the bottom,
    and we'll do one top joint and one bottom joint
    just to explain what's happening.
    Here's my top left joint, and let's look at the half-laps.
    The half-lap is gonna take away half of the material
    on the underside of the side piece, somewhere like this.
    And then we're gonna remove this material
    from the top side of the top piece.
    Something like that, so when they nest together
    the side piece just runs all the way through.
    Our bottom half-lap is pretty much the same thing.
    The side is gonna travel all the way down
    and it's gonna overlap the bottom piece.
    I like to dummy proof the process by making pencil marks
    that indicate where my cuts will be.
    I then use a cutting gauge to slice the grain
    and firmly establish my shoulder lines.
    This cut line not only helps me with setting up the tools
    but it ensures a tearout-free cut.
    There are a lot of different ways that you can cut half-laps
    but one of my favorite is to use
    the table saw with the dado stack.
    I've got my stack set to
    of an inch in width
    and I'm just gonna use the miter gauge with the fence
    to line everything up and batch out these cuts.
    So the blade is set to just under
    of an inch.
    We're gonna dial that in second.
    The first thing I wanna dial in is the fence position.
    We'll start with our three inch shoulder cuts here.
    Let's put the work piece down
    and try to get everything lined up.
    I really just wanna get that cut line lined up
    pretty close with the outer tooth of the dado stack.
    You can see how close we got, so I'm just gonna
    nudge the fence until we are right on that cut line.
    That's about as good as it's gonna get,
    so now I can remove the rest of this half-lap
    and we can address the blade height
    to get the perfect-fitting half-lap.
    Now if we take our two test half-laps
    and put them together on a nice flat surface
    we can really see what's going on here.
    All right, there's a nice lip,
    so I definitely undercut it, that was intentional,
    and now I can just sneak up on the fit.
    Keep in mind though we have to be extra careful
    about high we raise that blade,
    because the effect is times two, because we're gonna
    remove stock from this piece and from this piece,
    so be very, very cautious with your adjustments.
    And after a couple rounds of adjustments,
    should have something like this.
    Mine are just a little bit proud.
    I'm okay with that because I have ways
    to finesse the face of this joint.
    But boy, that is-- that's darn close.
    Now we can cut the rest of the three inch half-laps.
    Now we can adjust the fence for the four inch half-lap
    and for this one we're gonna leave the blade exactly
    where it is in terms of height, it's already dialed in.
    All we need to do is move this fence.
    Now you want to examine all four of your joints
    and just make sure everything fits together
    the way you want it to.
    You should have a pretty gap-free joint up here.
    The underside is a little bit less important because
    you're not gonna see it, but it should be nice and flush.
    Now, feel with your fingers.
    If you followed my instructions you'll notice
    a little bit of a discrepancy here.
    The side piece sits proud,
    I feel a little bit of a lip here.
    And the same thing with the top piece,
    it's a little bit proud of this end grain.
    That is absolutely intentional and the reason is when
    we clamp this together, you'll see this in a little bit,
    we need some pressure that's gonna bring it in
    and close up these two shoulder areas here.
    So a built-in way to do that is to leave a little bit of
    extra stock that we can plane away later,
    and that's gonna help us with clamping.
    The other thing to look at is to
    make sure everything is nice and flush.
    If you find that the pieces are just a little bit proud of
    one another because there's a little too much material here
    at this point, if it's a tiny amount, you're probably
    better off at the workbench than at the table saw.
    A surface like this right off of the dado blade
    can actually be a little bit rough.
    You're gonna have some high spots, some low spots.
    So just using a block plane, or in this case
    I've got a rabbeting block plane where the blade
    goes all the way to the outside of the body.
    You can take a couple of passes
    and just remove those high points.
    Watch out towards the end, you don't want to tear out
    so you might kind of, give yourself
    a little bit of relief there, just in case.
    Try to take even passes across the surface.
    Now if it takes anything more than just a couple of passes
    you probably do wanna go back to the table saw.
    This is only for the purposes of finessing the fit.
    So a couple of passes, you can see we're nice and smooth now
    and this should fit perfectly.
    The next thing I wanna do is add a little design detail.
    This is something that's completely optional so you
    don't have to do it if you don't like the way it looks
    but I do like the way it looks, so what I'm gonna do
    is put a little chamfer on the inside edge
    so when these two pieces meet, there's actually
    gonna be a slight gap created between there.
    When we do the finishing later,
    and you'll see when we start to use the glaze,
    you'll see how that will actually help us.
    But you may not like it, you may just want a
    totally flush fit here, so ignore it if you don't like it,
    but let me show you how I do it with a block plane.
    What I'll do is just put a light chamfer on this inside edge
    and this is one of my side pieces here.
    And I'm basically just gonna count the strokes.
    If I keep that number consistent I should have
    the same chamfer on all of my pieces.
    So that's about what I'm going for,
    just a nice, light chamfer.
    And at this point these are sort of sharp edges.
    I just wanna knock them down a little bit
    with some
    paper and soften it up.
    Our top and bottom pieces also need their inside edge done
    but before we do that we're gonna do the shoulder.
    The easiest way I know to do this
    is to just approach it from each side.
    If I go all the way I'll definitely get some tearout there
    so let's just try to avoid it.
    Even with a sharp blade those end grain cuts can be a little
    bit rough, so I like to have a little stick, basically.
    This is just a little piece of MDF
    something or other schmutz that I have in my shop,
    and I put a little piece of sandpaper on it,
    and it works as a little, flat sanding implement like this
    that's perfect for small details.
    And I can use this to smooth everything out.
    Only after both of these ends are done
    will I go and do the long grain.
    If I do have any tearout this should take care of it.
    You might be wondering, why not just use
    a router to do an operation like this?
    Well, first of all, getting the end grain parts done,
    that's gonna be a little tricky with a router bit
    because the bit and the little screw that holds the
    bearing in place is gonna wanna make contact,
    so you don't have much room to play there.
    And if I'm gonna use my block plane to do that
    I may as well just quickly get it done,
    and now I don't have to set up a router bit.
    And frankly with one frame it's just as
    easy and quick to do it with a block plane.
    Sometimes it's just fun to use hand tools
    and to incorporate them into your work
    when you can, when it makes sense.
    It's very gratifying, and it puts a little extra
    love into the project, there's nothing wrong with that.
    All right now for the fun part, we can do the assembly.
    This glue up is gonna take a little bit of strategy
    and some forethought, so we're gonna have four big clamps.
    I'm gonna use my parallel clamps,
    but there are other types of clamps--
    pipe clamps would work for this to--
    to apply pressure from all directions
    to close everything up.
    But we also need pressure at
    each and every one of those half-lap joints,
    kind of pinching it and sandwiching it together,
    so I'm gonna use three clamps per joint
    and I've got all these little small clamps for that.
    And because we don't wanna dent the wood
    and it's nice to have something to spread out the pressure,
    I've got a couple pieces of scrap cut
    that we'll use as cauls to apply pressure.
    And I'm gonna use a long set glue,
    basically it's a Titebond Extend, just gives me
    a little more working time for something like this.
    All right, let's get to it.
    Each joint gets a generous amount of glue.
    And look at how much long grain glue surface
    we have to work with.
    No wonder these joints are so strong.
    Now I'll add a little bit of pressure,
    and then bring in the second set of clamps.
    If you look closely you can see that the
    16th of an inch overage ensures a nice, tight shoulder.
    Now I'll loosen and retighten all the clamps
    just to make sure that everything is hitting home.
    At each corner I'll drop in a caul
    and add the small clamps.
    Now you might think that the joint is tight,
    but what what happens when we apply pressure.
    That squeeze out tells us that we're making good contact.
    Of course you want to check for square as always,
    but if your half-lap shoulders are nice and square
    there really shouldn't be much to worry about.
    After a few hours I can remove the frame from the clamps.
    I've definitely got some cleanup to do on the frame
    but before I do the fine stuff
    I'm just gonna start with a sanding block
    and remove any of the big offending glue squeeze out
    that might be dried on the surface.
    Now let's talk about the curve on the top of the frame.
    If you're just making one of these you're probably
    better off taking your measurements,
    kind of like we did on the drawing,
    and using a bent piece of wood or drawing bow
    to make the curve right on the frame, cut it,
    and then finesse it so it's nice and smooth.
    If it's a one-off project that's all you need to do
    but if you're building multiples like I am,
    I'm actually building two of these,
    and if you think you might be building one in the future,
    it's a good idea to get a template, finesse that template
    and then use the template to transfer the marks
    to the other pieces.
    What I'm gonna do is cut out of this actual drawing,
    we're gonna cut this top piece out, and then
    I'll have a template to store in the shop for future use.
    I use the bandsaw to cut the rough curve.
    And then use a block plane to work down to my line.
    Of course, a flexible sanding strip finishes it off nicely.
    Now with my template I can just drop it on
    while my frame's here. Make sure it's centered.
    You pretty much line it up by eye
    if it doesn't reach all the way to the ends.
    Now to cut the curve I'm gonna use the bandsaw
    but because I've got a full size frame here
    it just gets a little unwieldy,
    so I've got two roller stands set up
    and a piece of plywood sitting on top of it.
    It's not super stable, but it's gonna get the job done
    just giving me a little bit of extra outfeed support
    so I can focus my attention on making sure
    I don't go over my line.
    (bright music)
    Now I'm just gonna attach the template
    to the work piece with some double sided tape.
    You might find it as turner's tape, but
    it's a nice pressure sensitive,
    really sticky double-sided tape.
    Once the template is where you want it,
    put down the pressure.
    I'm just gonna flip this guy upside down
    and we'll pinch it between the dogs here.
    And my router is outfitted with a flush trim spiral bit.
    I like the spiral action on this because the sheer cut
    gives me a nice clear cut, even on this really figured wood.
    I've got a little double bearing down here
    that's gonna ride up against the template,
    and this should give me nice, clean results.
    (bright music)
    Anything the router wasn't able to get,
    I can just use my rasp to continue on, and I just have
    this little piece at the end that needs to be done.
    And for the rest of it I'll just use
    my flexible sanding strip.
    Now of course you'll remember we left these parts
    a little bit extra wide to help us with the clamping.
    Well, now it's time to fix that.
    It should just be a little bit proud of the end grain
    on both sides so what we need to do is make some
    clean up passes on both the sides and the bottom,
    just to make sure it's nice and flush.
    I've got my jack plane here setup
    and I specifically have my
    degree bevel.
    This is a bevel-up plane,
    so if the bevel is a little bit more severe like that
    it's actually going to be a little kinder to us
    on a figured wood like this.
    If you have a real low bevel angle,
    you might actually end up with quite a bit of tearout.
    So you do need to be careful.
    Other things you could do, you could probably
    set your jointer for a really, really light pass
    but you have to be careful, because once
    you get to the end of the pass you're gonna hit
    the end grain of the other part of the half-lap and you can
    snap that right out of there, that can be problematic.
    So if you do that, be very careful about it.
    But I think a hand plane is probably the safest bet here.
    Once you're able to get a nice clean shaving
    all the way across and you're even at both ends,
    then you should be good to go.
    And I'll do the same treatment
    for the bottom and the other side.
    All right, that's looking pretty good.
    Now I'm not quite ready to cut the rabbet
    because I'd like to do a little bit of preliminary sanding,
    and plus my glass isn't here yet.
    The sanding we're gonna do is just gonna
    smooth everything out, and if you think about it,
    we still have to do a routing operation,
    and whenever you run that router on the surface
    you have a chance of denting or scratching the material
    so if you sand it down to
    grit at this point
    and then you have a router operation to do,
    you might have to wind up sanding again later.
    So, at this point we'll do some preliminary sanding
    but we won't go all the way to our final grit.
    (bright music) *** *** DIY phone cases designs! Decoden, mirror & more! - YouTube !!! English English Add subtitles/CC
    Hey guys!!
    After showing you my DIY decoden box in one of my past videos,
    a lot of you requested me to do some decoden phone case designs
    so that’s what I’m making in this video!
    The things you will need are:
    some decoden cream or white silicone caulk
    piping tips
    some plain white or transparent phone cases
    and lots of cabochons
    All of these are from an online store I found recently called
    and they have lots and lots of different cabochon designs at a very affordable price
    They ship internationally, so if you don’t know where to buy cabochons this is an excellent choice
    I will leave a link in the description box
    with a discount of
    You will also need a decoden sauce for one of the designs.
    For the first design I started placing the cabochons on the phone case
    until I was happy with the design
    And I took a picture with my phone
    Then I placed a piping tip on the decoden cream tube
    and started decorating my phone case.
    Once I covered all the surface
    I placed my cabochons using the picture I took before as a guide
    Finally I also placed some pearls here and there
    I let it dry for
    hours and that’s it!
    For the second design, start the same way
    placing your cabochons on the case to make the design you want
    Then, use the decoden sauce to make a dripping design underneath the cabochons.
    I also placed some little pearls with the help of some tweezers
    Let it dry for
    As you see it dries darker
    I placed a little bit of decocream with the help of a piping bag
    then placed my cabochons the same way as before
    and my design is finished!
    I think this design is really cute without being too over the top.
    For the last one I decided to incorporate a mirror in the design.
    And this time I used regular silicone caulk because I ran out of the decoden cream.
    So first, I placed my mirror and cabochons on the phone case until I was happy with the design.
    Then I glued the mirror to the case with strong glue
    and with the help of a piping bag I decorated the case with the cream, starting around the mirror
    Finally I placed my cabochons and some pearls and let it dry
    !! I always wanted a phone case with a mirror on it and I’m really happy with how this one turned out!
    So I hope you liked my take on decoden phone cases
    hopefully I could inspire you to make your own designs
    and don’t forget to use your imagination to make them look exactly like you want
    If you have any video request leave it in the comment section
    and I will try my best to make it happen
    Thanks for watching!! ^_^ *** *** Doh Vinci Style & Store Vanity Design Kit DIY Design Your Vanity Mirror By Hasbro Play Doh! - YouTube !!!
    everyone here and today I'm super excited to bring you a da Vinci identity
    design kit here's the back of the box that looks like a lot of fun it's really
    easy to use to all you do is choose a decoupage happened in the dialer and
    then a.m. greens and let the inside the box
    we have bloomed
    and paint
    do you think
    here's our pin attachment
    in a design tip

    and other
    this is the bottom vanity
    and here's the driver doesn't think
    here's a flower
    let's continue
    and then
    and then *** *** How to Do Wall Mirror Art : Interior Design 101 - YouTube !!!
    hi my name is Matt touch and I'm in interior design here's our
    fun alternative to traditional are know the variety of sizes
    and styles available design options are virtually limitless
    starburst years all the rage now and it's no surprise
    single entities about the silver of a is it easy way to create
    is typical play and their unique shape and dynamic feeling too any
    now battle mir's are a great option for modern or contemporary interiors
    live right price plans available is easy create a nice ice cream sixer it is
    about the silver
    instant drama yeah love to shop online or in the two stores or even just happen
    to have a lot of mir's on hands are mismatched
    you can take a punch in this match mir's and keep the frames in the same
    single color spree in a sec liked including for your walls
    finally don't forget about using just a single
    large rectangular year this is a great way to make
    a small room feel a lot larger so the next time
    looking to add a little bit drama interest your wall medium here is the
    right solution
    up *** *** $5 Dollar Tree Up-Cycle Challenge: DIY "Pottery Barn Inspired Eagan Mirror - YouTube !!!
    hey guys this is him a lot and you watched on another
    the designing
    with hope I'm design design for the home body so now I'm doing another you to
    collaboration with Catherine from immature decorated like a pro
    the fact you would YouTube channels and I would ask their channels below in my
    description now you to elaborate she can challenge to go to one of our local
    dollar general stores of Dhaulagiri we only have $
    purchase some items to your website or recreate something new and existing I
    don't know I just got to purchase for these mirrors because I am going to
    recreate Pottery Barn even more Thai panel so let's go ahead and get started
    now these are the items and you are going to need in order to reproduce this
    going to need a poor effort if my dad was your favorite spray paint color and
    your be six thousand good now your first step you want to make sure that you
    remove all be hanging hardware as well as remove all the stickers from the back
    of each other near now in this next step you want to take commuters who wants a
    layout of pattern then you take care measure may want to pester so that way
    you'll be able to take your measurable to your local and have a board keg in
    order to gluten mirrors on to
    you get your board cut my board happened to measure out that
    inches by

    inches then you're ready to spray paint the board in the decorative Magana now
    as you can see I've already spoken to the board I used a silver metallic spray
    paint color so that it will match the silver there is no money right now I
    forgot to mention that you are going to need some picture hanging hardware and
    what I decided to use our and pitcher water so now this last hour we're going
    to go ahead and finish out lol we're on the last day will recreate in this would
    have already added all the mirrors on to the poor i simply taking it easy

    glue and climbed on the back of each mayoral race distance and then the last
    it will take you decorative medallions you at the e
    lou back of each
    medallion and your academic achievement each episode do point on the mayoral
    here at our final product you have recreated part of arms ECN
    for only
    $5 are simply using items purchase from the Dollar Tree now what
    bagless Recreation Department born and brought up anal me know if you decide to
    tackle this project please be sure to share it on my Instagram by tagging me
    hope on designed to yes I share it on Facebook page that design went to give
    thanks for watching hope one design design for the whole body so *** *** The Template Method Pattern - YouTube !!!
    hey buddy anime back from reading my
    intermediate microeconomics midterm which is the reason why I am Not really
    talked to rosa me
    but I am back and I N
    heck with them were designed by Charles I said I'm gonna be my last but I loved
    it I'm panels because they're so awesome so
    we're back for more today designed Pedaru be looking and got the template
    and Om definition for N arm
    people really interchange between tempting but the patter and temper
    om to the reactor the same thing service
    see what we get would be has see well attempting method contains
    met this guy out in a min algorithm one or more of the algorithm steps can be
    overridden by subclasses
    to allow different behaviors while ensuring that the over
    arching algorithm still followed so the overarching algorithm
    is a step series of steps so it's a arm
    step it
    within those steps the you love them differ between two subclasses
    so I see step 5: differs well in this case we will %uh
    the algorithm override or that the method be overwritten by
    subclasses and by doing so they can arm
    create their own behaviors and that is basically the fifth for the
    done tempting method pattern
    itself very simple pattern and arm
    it relies heavily upon
    on and hair tent and abstract Rapids
    sup depend on the language and arm which is for C sharp so it is
    so this take a look at the diagram that wikipedia has provided
    well here is that recross they define primitive operations which is
    some methods and then they have at
    template method which basically calls
    other methods and Dom someone these methods are overwritten
    by the concrete class the operation one is over and copper into and do something
    because they differ between each country cross now you can have many many country
    to basically you have omitted and that is going to call
    other methods and if there's anything
    anything similar will be called from that your class anything different week
    off from the concrete cross
    so bad is it girls done
    now I'm skinning through doings ample and %ah mick is one prime example would
    arm making a pizza making different a pizza could be different
    so one step could differ from another
    to hear I have already read some papers in code and I'll go through them with
    basic need both the have two crosses me by Peter Beattie Peter
    which is pretty much topics battery and Dom make pizza
    well veggie pizza not necessarily a vegetarian pizza is just loaded with
    veggie toppings so a frenzy confused when I was younger so
    okay so make keep that basically is
    om cause a series of steps a sousa methods
    to make the Peter me same thing with a meat lover
    however they only differ is add me topping and veggie toppings
    now a public thing oh my god
    this is the template met the right now yeah
    and it is but we have to make some smart peaks
    and I'm corrections as you can see there are a lot of ways in abstract it and you
    save on a call to kitchen to actually take a look at the methadone
    already made always just works the dough
    no makin to circle I did not call that so hmm and Scott me
    go on be both at tomato sauce so
    tomato sauce and down here same thing
    axes exactly the same thing again and then
    the only thing differs is that bad need topping and Betty toppings
    Cadbury Pranav different things now McCann best you can be
    hey while falling to tempt the pattern we should crazy
    an abstract class our poll everything at the same
    up into it and you are indeed correct so let's go ahead and
    add I'll not a reference not at a reference
    an item we'll call it
    keep top God I think I have some sort of special food
    kilometer over up is the food anyways
    I'm this is going to be something abstract and
    there we go we're going to do any work in a copy
    this code
    and then what we're gonna do is making inherit from Peter
    and we do the exact same thing with me lover we are making her for pizza
    and we do meet the code that was redundant
    right one step down so what's next
    well the state's that armed abstract are a bit sorry
    the template method pattern states that their
    steps there at the same and in our example it is
    the fees met its but there are methods there are
    difference down now a sad different behaviors
    and in this example it would be
    add toppings however big this thing called States one says
    add me topping get a wanted ad veggie toppings
    which known its to detailed arm
    we don't care about the tech topics you adding essentially just just adding
    so what do we do we just make it om something
    we make them both in common so then we can find an abstract method
    here we will to find after method at talking now
    because they have different orientations in both the surpasses
    and but the require that the
    they require that the after class can known saying hey
    I have a medical at topping but I love my concrete classes
    override me here we were at public
    public abstracts a boy he
    had toppings
    arraign so now that we have that done
    we're gonna get an error because hey which internet the name here
    delete them correction in our same okay
    we can now upstate more code we can move is even higher
    up the food chain
    here we would just go straight to you Peter
    and now this looks exactly like abstract method actor
    abstract method to that template method pata I apologize I'm not using these
    param name
    so we have too tempting method which states that a No
    typing method basically cause other methods within the class
    and the a cause my
    is wrong with my mouse right
    and it says okay I a few comment these are the same and methods that are
    different for abstract
    and this is what does this is weekend after class
    to find in that ship has to find the magic last defined in the concrete
    here we will %uh the concrete classes
    decide the implementation okay same thing looks
    getting go now and that actually make it Brian
    so we will have to a meat lover pizza
    meat lover My Little Pony August anyways my friend into my little pony:
    and Dom yet he the brownie you know what i'm talking about. they don't worry
    about it
    it's just some TV show that is aimed towards kids my friends watch it so
    I'm not going to judge them be good at what they like for had
    is kind of a sometimes sewing defined 01 pizza
    on veggie pizza because new
    veggie pizza
    so what we can do well we're gonna say
    well world My Little Pony the om
    and we will call to make pizza
    and they know print out the steps in order to make the meet the pizza
    they were signed to new reference I
    come see to pizza as a man the peten
    its again December make a vegetarian Peter
    are not budgetary very a veggie pizza and on there were gonna carbon make
    them India consul dog brake line
    and I know you're probably reading hey arm know you should read in caps let
    your methods but Tom this is just a quick tutorial
    arm a course different teams are across different
    I'll different code so I'm you make your
    you make your changes where necessary I'm not gonna word too much about
    object-oriented programming are printables
    but down by do highly recommend the fold them
    I am rekey okay
    the selected to run it with
    hopes shipment the
    changed where is out about the override
    for everything looks good now gain
    so we can see that the overarching algorithm stays consistent
    we work the dough from the top work to do on the bottom
    at tomato sauce at middle-sized at she said she's but then we add
    different toppings so this is his CV
    it for the tempting method patter
    arm it very simple and it's very easy to use and
    it's also very good at pattern my opinion not as well known and not as
    or not as commonly talk during post-secondary
    sewing on this is something I'll be nice for me to learn to you
    and I hope in God is our guys and I will see everyone next time
    well guys n girls don't need to be sexist had and
    of the everyone next time hope you enjoyed *** *** Mirror Blocks pattern tuturial, and how to use them together (part 1) - YouTube !!!
    here's fears me on the rocks
    on some patterns and how to make those
    hands on me and trapped for him
    first is checked you dont
    stern everything to every side
    Nana to Tom's Sony of two
    arm Beach
    each oMG on
    world to
    nomination for

    Prime Ticket
    here it
    in the country
    me a box
    there's extra was gonna be checkered on two shots
    now fish on the mir walks and some regulatory
    I when you do is just too
    are two arm
    to l
    beaches you too
    sound out to
    featured and also this
    now from scratch and
    there are many methods I was gonna show you on the easiest one
    or i think is easiest way and
    the more advanced which is what I is on
    I'm noms use notations verse close
    it's just this
    into its
    like its chips so
    what I think is easiest way now the way I do it is um
    are two
    to l
    are two to
    onto aft
    and thats we
    this sacked talk its
    to be
    service here was a little messy my sisters
    prod and his little clipper
    into commuter town pretty cool
    so turn and Oxford
    com now it looks like
    just staying on top and model
    those who actually fit into each other if yarns
    all right now there's a cue
    which one it is into the sea other
    thats pretty cool
    arms clownish for you I don't really know
    from where you see any
    arm you have to grant results on to
    com is really easy
    some on the orientation
    are two to to
    to shoot Chile
    to them just it here
    year for them
    fit together another one
    I'm not define on
    would be awful yeah
    and this i really this time here
    non assure you check and I'm for science
    on still have your thing for one's country science
    cutest help solve national
    from cue you do that on scene
    easy and it is this annual mock trials
    any notation ninety
    to g
    unlike the pattern for except
    difference she is very similar to the pattern for
    I S
    if you have a lie quantities you can do I come here
    wall just
    on yeti for science *** *** How to make step pattern in mirror cube - YouTube !!!
    I me sale
    how to me state Inc
    her cheek
    not what Frank
    like Lake one
    one now flight
    light line now black wat Lao
    like like now okay
    okay sky-high i right okay
    air a a happy
    a I'll
    a yeah
    a now at cash at bank
    cue back actual writing
    UK hike here
    now *** *** Chair pattern in mirror cube - YouTube !!!
    I think bad here with them if you
    in this video I'm one showing
    how did the check back in the day
    she was here yesterday go
    yeah this year this is the longest okay issues
    ones and a newsletter
    in the long list people over here at this link yes
    %uh a
    hey I'm good you'll morning near hard
    social you have to keep my
    or knowledge yeah can you spend on this year
    and see this is down this year
    an internal issue his
    to keep the cat it had been there and
    he girl sorry yes thank you
    that finished this that up
    okay now final
    you yeah I you place Edelweiss
    you twice
    in your place and
    that shit the bring it back bath
    and like this Uruguay
    K you
    kill this house all of the shit
    thank you alright *** ***