Cake tutorials

, hroch, flodhest, , hippopotame, Nilpferd, ippopotamo, flodhest, hipop?tamo, , povodni konj, hipop?tamo, suayg?r? Hippo, hroch, flodhest, hipopotam, hippopotame, Nilpferd, ippopotamo, flodhest, hipop?tamo, nilski co, povodni konj, hipop?tamo, Hippo how to make

Hippo, hroch, flodhest, hipopotam, hippopotame, Nilpferd, ippopotamo, flodhest, hipop?tamo, nilski co, povodni konj, hipop?tamo, Hippo how to make


    , hroch, flodhest, , hippopotame, Nilpferd, ippopotamo, flodhest, hipop?tamo, , povodni konj, hipop?tamo, suayg?r?

    Our site has collected lessons , master classes on various websites that are dedicated cakes, cakes decoration. If you are the author of the lesson and want to supplement the information to change, exclude it from our website or have new lessons write request through the form on our website We will consider all your ideas!


    Cake decorating - how to make baby converse shoes - YouTube !!!
    well out some white aren't aren't and cut to pieces
    this so love the shoes that make sure that once you've cut
    one side turn your template around
    and then cut it on the other site to make sure that you have the right and
    the left foot
    and not to rate all know and cut number three
    in a different color and you gonna roll at
    and cut number four in the right color
    and then what you're going to do simply by you think a little bit of
    water take the white Entente
    brush some water and glue it
    to here and he sold his shoe
    I am brash to friend part with water
    water and font on will create go to
    take the two pieces that you create it
    and just bend them a little bit to create some kind ever
    round shape Lake cell and then
    glue this to your p
    what you can do in order to have a nice shape to shoot the simply take some
    pressure indicator
    and could end side your shoe
    so that its gonna help to mold
    the issue but also what you can do I have a little trick
    I always cut my pieces in advance and I let them to July
    just couple of minutes so that the font on gets hard a little bit
    and its much easier to we create
    the fact that this you cut-out death camp that twice
    and then just to give you guideline take your template
    and just passed down
    on where you see be the littles holes right here because this is going to be
    really
    and then what you can do with either used a nozzle
    or also what I like to do is use
    something to back I'll base shop
    and create your little holes
    that are you going to do
    as create all the Atlanta what your quilting tool and it's very important
    that you were first
    Entente p
    brush some water are around to solve the shoe
    except for the front take both piece created
    and glue them
    to your cell
    then for that bottom part again
    brash a little bit of water angle who
    both pieces together
    cut out number six and
    with white font on
    and recreate the little wine with your quilting to a
    take a smaller piece make sure that the quilting at that the top
    turn it around pressed some water behind it
    include that at the front abuse you
    what do you want it's for it stay here in the corners you don't want to go
    like further away do think the statement that
    biggest peace always making sure that the quilting
    is at the top
    dan rule out blue font on with your number nine
    and recreate the same quote in mind
    only around all
    once you have thats just fold
    mebbe a quarter that brush a little bit of water
    and include death behind your ship
    to create the leaf is cut out three stripes
    have white farm dont and what I like to do to help me out
    as that I squeezed both and and this will help me
    to glue it to my shoes
    brash a little bit of water and then
    them clean
    fired on top and what you can do as Brenda
    one plant inside those holes so it just gives that
    cute a fact
    so once you've created
    all your shoe you can leave the paper inside
    until it's a really dry if your shoe needs help to be mold
    it's not mind fanning really nice on its own
    just take it out and leavitt to dry
    into hard in for at least
    and there you go
    this is how we do the congress you hope you enjoyed the video *** *** How to make fondant baby shoes - YouTube !!!
    hi am case your honor she had to make these little fun
    duty I've got a cheat or

    contest by she's pace just
    more just a plain pretty Xing CAI
    on top kayak their really
    a Mac and you can correct them
    had a times but take twenty write them
    help joy hi
    okay festival yeah
    is the template and I'm gonna use so openly to the template so that sound
    you can all use the same one basically I
    this is for once you you gonna need to contact
    to Saul's and then you get an eight this activists
    up the other she's obviously you got left and right little BT
    I mean so I'm this Leah also
    Road and and it's in Thailand Pattaya into my fondant
    so that it's gonna hi it's gonna happen probably all modeling you need
    eighty you should the price gumpaste all use phone did with hiking aged I
    responded with
    honey ninety row that ass I'm
    it's a decent thickness Pottstown
    you need to sort of let it sit there for dish you find any related
    as you go if you start cutting and trying to stick it to get up and it's a
    flimsy
    is not going away can you know I've that you have to sit there and wait for that
    say I'm going to cut my paces and found
    been I printed this onto sorta in cod
    so I i'm up aces over-funded
    cut around the knife hope that it I can cut around it probably
    and down on it and let city for a little bit so that its
    stick
    I'm nixon uses teaching tool
    this is fantastic and I'm just gonna gently put it around the outside of my
    long pace is a fund it
    just site yes teaching effect
    say government on the base job it's not not Accurist
    not that new definitely day okay the next thing
    is and going to make sure
    donating to be sticking to the grants and
    my paces I'm gonna stop putting some water and here
    with mic
    okay so it the reason that the
    is got the red mark is because thats
    is the points that you won't miss me your
    this is where the two pieces again enjoy
    sigh basically in the center of the
    Siri hands
    there's really should get some toilet paper
    he say this has been sitting here for a little warmer
    funding so its North
    many here
    with a joiner you were just put a bit of unintended some
    that they have ordered and the syringe so that it can juneau
    together
    speak you can see the
    actually to me any chance want
    gonna go get some toilet paper and stick it in fifth
    she hatin
    say it's just joined up nicely their fucking
    that society and it's pretty a venir and they said that's crichton's can't wait
    for that
    to I'm happen I V notch
    okay so here are two little should
    am I'm just gonna let them sit here and try and make sure kids
    to not touch have a hope they had in okay say
    here the finished product just one
    really cute now I haven't extremities all
    I'll pot what I'm thinking you could
    is I you know to leave boys your life
    unisex pic fat girls yes time
    lawson's for
    just stick a little since last if you just take one big
    flare
    here he my disintegration tease
    PR I'm I for boys us to keep
    make monkey or our yep
    busy animal a and and put it on the end
    and that would look so cute they just said stop on top
    set up on top of tear
    top tiers cake anyway hope you enjoy sheet or
    up to damn lies in the past
    joy *** *** Fondant cake decorating - How to make baby Crocs shoes - YouTube !!!
    hi guys today I wanna show you how to do this you're really cute cake topper
    hope you enjoy the video
    to do this all the
    0 at the very important i faded on my all my tutorials on shoes
    it's very important that you do you cut one side on one piece
    and then you use a template you turn to Tampa around and then you cut on the
    other side
    now to do that template I'm just so lost you
    I'm what you need to do is after you cut your template
    you need to squeeze both and I'm you can use any tools you can use your hands
    doesn't matter you want this to be squeezed way
    here and on yet aside
    live because crossing the playback don't know why
    and then from there what you need to do is you may use
    a any tool that is pointy and I around
    you're going to pressed down
    and create does little
    shaped don't be scared to
    arm create decrease because
    basically that's the look that you want so you gonna do that
    alway around on your tablet
    you gonna see there's little triangles love those triangles that's what I mean
    basically arm being
    pressed down with your
    so see you have you can create value increases
    you gonna turn around her so and even a youth
    any I too late you have I'm using a ruling pen
    and basically you then it passed down in create
    some kind of fact crease like this so that it looks
    like I so want to crack Catholic member to
    you're going to create these little holes better on the template and to do
    so
    you're just going to use a tool that if pointy
    I'm using well
    but you can use any tool that you have really
    and you just gonna pass down where did thoughts or on your tablet
    and it's just going to create at this i kind if in fact
    if you want your post to the Baker
    or if your template to you print it out at larger
    you can make those hoes with that shock
    just by pressing it down and it's gonna create perfect
    are whole and then to create fetching
    again I'm using this tool by Wilton
    basically you just go all the way around but you can also
    by Wilton again arm to create
    that same effect with this tool or even any
    to let you have a home I know that but I it's
    if you go gently it will create a front but the issue it's very simple
    where you gonna do is copy number three template and basically never really put
    your template on top
    of your keys your cart and you think appointee tool
    doesn't have to be that bad I'm just do you think that was already have it
    you're just going to prosper down all
    see where you have all these little on top tier
    you type of town in the middle of the thought all the way through your font of
    and I knew how something looking like about the thoughts right here
    and to create these a holes right here you're basically going to take
    shock and literally
    use those little tot I think guideline and
    Prostar your strop and feel hot
    a nice cute little hoe I thought and then you couldn't continue
    with although other top mean you how your
    Keith like that so I ready to attached number
    when and number two together so you're basically just going to put
    either a little bit of water water works just fine
    or a little bit of edible
    go to I I'm been tying you numerous times
    if you like it he said to be Hardin
    and be easier to work with it's better that you let them dry
    a little bit once their all cut and
    like bad is just much easier to
    for work with as you can see I don't have to
    but anything inside so that it stays together
    will cut meat this says already it's holding even at DuPont as
    fall this part half a little bit
    and Indiana passed down so basically you want the bottom part to be flat and
    top part
    just like back i cant you're going to put
    arafat are good you at the top
    or water and
    just text so and you're going to attach
    UP State you just fault that
    jacquelyn where
    ER arm
    font on peace already good tissue
    sometimes can be tricky but just play with that
    don't be scared
    and then you gonna at hatch your last piece
    with the number for and I cannot lie to you
    had your number arm for template
    you gonna do the same thing as you did as with the other pieces unit create as
    teaching
    all the way around
    and that peace
    you're going to good right here saw that I'll
    go here Anna little clue there
    match the morn down here
    and then even a band this
    you can lower it that's down
    messing
    here to this point if you want
    on Tupac you should talk or properly
    you could put something but this is exactly what I was saying to you
    look at this book how it standing on as on and the reason why
    as what I told you before you
    even glue your pieces together let them fat or dry for at least
    minutes
    and they just become a little bit hard and ur so
    much easier to work with them like you can do it as attach a little flower
    on each side or whatever design that you want and they were
    just look a little bit more realistic South I really hope you enjoy
    is really cute video *** *** How to make a baby shoe pattern from scratch - YouTube !!!
    welcome to my youtube channel
    we're going to learn today
    you make a pattern for some baby
    it actually fairly simple it
    three pieces and I'm going to show you how to measure
    all of these just on a simple eight-and-a-half by

    sheet of paper all you're gonna need with this is a ruler
    one sheet of paper and any
    former writing utensil first things first
    you know what a measure happier sheet of paper
    lengthwise and
    obviously go
    and have it doesn't really matter just as long as you have
    that
    straight line to follow notice called on the middle school
    gonna follow today first I am
    we're gonna follow is my sold my shoe or the bottom
    show a map gonna be a
    to just measure four inches an airline
    stay close to the top and then
    put some markers in here %um marker here
    and Marcus here then you're gonna want to measure
    two-and-a-half inches sideways
    and again just
    find that middle point and goal an inch and a quarter
    of each one and
    make your point and then just connect them
    what you're going to want to do it this is the bath have the sole
    issue and this is the front you're gonna wanna make this a little bit
    more wide that's where your toes going if you think your toes there
    people like this on
    and then make this a bit narrow that's right heel gonna go
    neck here gonna wanted your
    this is the top and you're gonna wanna do for them because when
    in our next video where your sewing them together you can understand why
    they need to be the way they do because
    it all connected to one obviously their next one you're gonna wanna make like a
    half from the circle
    happen overall better again
    start on this line measure cue
    inches down with a ruler draw that line
    then you know again mark your point
    here we're gonna do four inches market
    then you would have this wind and dust flying
    and then just can act that because again this is gonna be the tap
    the front overshoe and you're gonna wanna make that more why but it's gonna
    wanna bubble up so it doesn't wanna match
    what this looks like because I obviously need places to put the total
    next
    we have the back at the shoe in this is it goes from
    good it wrecks from basically BC of
    and that decide
    are going to measure exactly what peace there because
    in the next video again you know understand why that is
    I'm think they're going to want to make this a bit
    more than this because it gotta go around
    this but so
    we're gonna measure
    again mark your point then
    we're going should kill two inches
    it did not mark that but me two-inches' there
    and and then
    what we do here measured an inch and a half left myself a half inch for this
    bad your fee
    again in the neck episode way
    we're doing but just trust me so
    that we want this to be roughly two inches to go in there
    gonna mark solos care point gonna go down
    four-and-a-half inches after that two-inch migrate here
    and realign you got four point match these up
    straight at bottom when you're gonna want I can do occur
    if they get better goal but this is all you need to do for you then when you're
    going to cut
    you know I do to solve to tap
    and then Q back you can do
    already is but kinda wasting it just makes things
    I don't know its just better just to chill so then join me for the next
    episode you'll see how this process
    all done thank you *** *** DIY Clothes! 3 DIY Shoes Projects (DIY Sneakers, Boots, Fashion & More). Amazing! - YouTube !!! English Croatian Danish Dutch English German Greek Lithuanian Polish Spanish (Latin America) Add subtitles/CC
    How cool it would be if we could pimp our shoes like this? What?! Oh my god, not the
    sky! Oh no, what have I done? Nice!
    In this DIY tutorial I will show you how to
    transform plain sneakers and boots into the coolest shoes you've ever seen!
    Hey loves, I've already showed you how to transform your shirts and your shorts, so
    today it's time for shoes. I'll show you how to pimp them from plain to amazing. We're
    making three designs, which are all very easy to make, but look a million dollars in the
    end. No, but seriously. All 3 pairs are so great that I cannot even decide, which one
    I like best. So if you're ready to rock some unique and epic shoe designs too, keep on
    watching because we're gonna get down to business. Let’s start by jazzing up these white high
    tops into cool metallic snake skin inspired sneakers. For this DIY you will of course
    need some sneakers. Besides you will need some fishnet tights, masking tape, scissors,
    elastics, a container for the paint, sponge applicators, fabric paint of your choice and
    a plastic bag or a few sheets of an old newspaper. Start by removing the shoelaces from the sneakers.
    Then grab some masking tape and stick it all around the edge to cover the sole completely.
    To keep the shoes stretched and without wrinkles I like to tuck in a couple of plastic bags
    or some scrunched newspaper pieces. This will help us apply the color evenly all over the
    sneakers. I also want to keep the shoe tongue white because I'll be using some colorful
    shoelaces and they just pop so much more this way. And even more if you make some cool shoelace
    designs... but you’ll learn that later. Take the fishnet tights and cut the legs apart
    like so. You will need one tight leg for one shoe. Stick your shoe into the fishnet stocking.
    It’s up to you how tight you want to pull the sock, the tighter you pull it, the bigger
    square openings you'll have. I want the pattern to be quite full and concentrated so I am
    not pulling the stocking too tight. Secure the net in place using two elastics. It’s
    important that the net doesn't move while we are painting to get the clean pattern so
    the elastics will take care of that. All right, we are now set to start painting, hooray!
    Pour some color into a container and dip in the sponge applicator. Then color your shoes
    by lightly pressing the sponge against the fabric. You don’t want to swipe the sponge
    back and forth because this will probably ruin your design so it’s really important
    to apply the color with this dabbing motion. Time to go in with gold now. I decided to
    use three colors - silver, gold and red for some really crazy and unique snake shoes.
    As you can see I am making diagonal stripes, they don’t have to be perfect so I am just
    eyeing where the stripes should go. The third color I am using is red. Follow the edge of
    the gold and make a nice red stripe next to it by pressing the sponge on the shoe. I am
    not waiting for one color to dry, before proceeding to the next one, because I like the edges
    to be blended nicely. You can use as many colors you like with this technique and you
    can also switch up the pattern. Instead of diagonal stripes you could make random colored
    patches for example. Voila, I’m all done with painting and my shoes are looking pretty
    epic already. Let them dry for a couple of hours and when the paint is completely dry,
    carefully cut the net along with scissors. Remove the net and look how cool these sneakers
    are! Ok, let’s wrap it up. Remove the masking tape from the tongue and from the sole.
    I love these clean edges you get when using the tape! We're not finished yet, no, no,
    let’s glam these babies with some red shoelaces and epic Cray cray charms. I’m gonna show
    you a little bit different shoelace design. Start normally by threading the lace through
    the bottom hole. Now instead of making the normal crisscross pattern, take the right
    shoelace end and lead it up through the second hole on the right. Do the same on the left.
    It’s time to do the cross, so with the left shoelace end go through the third hole on
    the right. While with the right shoelace end go through the third hole on the left. It’s
    time for a blank space again so go through the fourth hole with the left lace end on
    the left and with the right lace end on the right. Make the last cross from the hole four
    to five and finally go from the hole five to six underneath the fabric to get yet another
    blank space. Tie the shoes by making a bow, take the plastic bags out and you are ready
    to rock these out of this world epic sneakers. I absolutely adore everything about them and
    I think the cray cray beads go perfectly with these shoes. Cause I know, these do look totally
    crazy but in a positive way they are crazy good looking!
    Let’s now make these cute colorful hearts shoes perfect for all you girly girls out
    there. You will need a pair of white sneakers, I got mine for around
    also need masking tape, a piece of self-adhesive paper, pencil, scissors, black fabric markers
    and some colorful ones. Remove the shoelaces and protect the sole with a masking tape.
    This step is actually optional because fabric markers do give you a good control over where
    you want to apply the color. But anyway, I wanted to be sure that the sole edge will
    stay white so I decided to protect it. Tuck one plastic bag into each shoe to get rid
    of waves and wrinkles. If you want your hearts to be perfect and neat, make a heart stencil
    by drawing a heart on a piece of self-adhesive paper. Cut it out and seal the cut with a
    tiny piece of tape. I decided to make two heart stencil sizes: a big and a smaller one.
    Stick the stencil on the shoe and outline the heart edge with a black fabric marker.
    Remove the stencil and place it wherever you want your second heart to be. Outline the
    shape and you get the perfect heart each time. I am first making a few big hearts and then
    filling in empty spaces with smaller ones. I like making some heart parts on the edges
    to get the feel that hearts are randomly sprinkled all over the sneakers. Now to my favorite
    part! Grab some colored markers and color the hearts. First one is pink, logically.
    Now I am going in with yellow. You can be really creative with this DIY. Switch the
    hearts for stars or flowers and use the colors you like best. Maybe just one or two or many
    different ones like me for a colorful explosion on your feet. When all the hearts are colored,
    remove the masking tape and these sneakers already look so cute and lovely. But we’re
    not stopping yet. How about some pink shoelaces and beads?
    I ordered some large hole beads online for a few dollars and for the project, I decided
    to go with these little turtles. How adorable are they? Start by normally threading the
    shoelace through the two bottom holes. Instead of the usual cross design, let’s make a
    sleek horizontal lines pattern. Lead the left shoelace end through the third hole on the
    left. Take your right lace end, slide on a bead and go in through the second hole on
    the left. Take the left lace end sticking out from the third hole, slide on a bead,
    and lead it to the right through the third hole. With that same shoelace end go up through
    the last hole on the right. And lead the other shoelace end up through the last hole on the
    left. Make a bow and you are finished with these sweet and cute sneakers. How pretty
    and happy do these look! Definitely a statement piece to any outfit. I have been loving colorful
    shoelaces lately and all the cool designs you can make with them. So even if you don’t
    want to permanently transform your shoes, you can have fun with beads and shoelaces
    of different colors. It’s like having a new pair of shoes every day!
    The last shoes we are making today are these amazing galaxy boots! The technique can totally
    work on a black pair of sneakers, but these boots were only
    dollars on sale, so I just
    had to get them! Beside a pair of black boots or sneakers, you’ll also need masking tape,
    scissors, container for paint, sponge applicators, a paint brush, and fabric paints: I’m using
    white, medium blue and pink. Start by sticking masking tape pieces all around the edge of
    the sole. We want to keep the sole black so we need to protect it before we start painting.
    This way, we can paint quickly without worrying that the sole will catch some color. Remove
    the shoelaces to prepare your shoes for the painting part. As said, I have a white, blue
    and pink fabric paints. To get a nice gradient from white to dark blue, I would need a few
    different shades of blue, so I’m going to mix a light blue shade myself. Simply add
    a drop of darker blue into white, mix well and voila you get a perfect light blue for
    your galaxy. OK, now we have all our colors ready and we can start painting! I like to
    start with dark blue applying it in a half ring like so, leaving the center black. Try
    to concentrate the paint on the inner edge of the ring and blend it into the black on
    the outer edge. Now it’s time to fill the center white. I like to add a touch of pink
    right in the center of the galaxy to make it even more awesome. If you look at galaxy
    pictures you’ll notice that it consists of some purple, pinks, even red and green
    colors. You can use all of these for your galaxy shoes. There are probably around

    billion galaxies in the observable universe, so I am capturing a few of them on my right
    shoe. Feather the color into the dark blue for a nice gradient effect. Make short strokes
    in the direction from inner to the outer edge of the ring like so. You can keep the tongue
    black but I decided to go all out and add another galaxy on it.
    There are galaxies with as few as ten million stars and galaxies with up to a hundred trillion
    stars, which I can’t even imagine how much that is right now, but it sounds like a lot.
    So take a precise paint brush, dip it in white fabric paint and go crazy with stars. I am
    drawing some bigger stars first. Then fill the space around with white dots. For bigger
    dots I’m using a q-tip, for smaller a toothpick or a dotting tool. I like making white dots
    in the center of the galaxy and then light blue ones further away. Also make sure to
    draw a lot of stars closer together in the center of the galaxy and then fewer and fewer
    as you move away. It's very important to use dark fabric paint whenever you are working
    on dark materials like these boots. As you can see my boots are made from this fabric
    material that’s why the color sticks to it so nicely. Just a few final dots and we
    are all done with our galactic boots. Remove the masking tape and look at this masterpiece!
    Perfection! Put on the shoelaces. This time I kept my normal black shoelaces because there’s
    so much going on with these boots already that some bright colored shoelaces would just
    be too much. And that’s it! I love how these boots look, so cool and unique. They will
    be my favorite winter shoes for sure. So these were my three DIY shoes designs,
    I really hope you guys like them and let me know in the comments, which was your favorite,
    snake, galaxy or hearts, because I really want to know. I love making DIY clothes tutorials
    so if you like watching them, just thumbs up this video. That way, I'll know that I
    should film more clothes DIYs. But yeah, I hope you guys are having an amazing fall so
    far and that you're doing great. I love you and I'll talk to you soon. Bye!
    Cool shoes are normally super pricey. So why not buying a plain cheap pair and pimp it
    yourself instead. You’ll end up with a beautiful designer piece, with the designer being you. *** *** Stiletto Shoe Cake Tutorial Fondant Pillow Cake HOW TO COOK THAT Ann Reardon Cake Decorating - YouTube !!! English English Add subtitles/CC
    Welcome to How To Cook That I am Ann Reardon
    Today we are making a Jimmy Choo shoe cake. There have been lots of requests for a shoe
    cake tutorial and Lisa has been requesting a pillow cake every week since May so I have
    combined the two. I will show you how to make the shoe first
    and then the pillow.
    First thing you need to do is cut out your shoe template, that is available on the website
    howtocookthat.net there's a link in the description below this video.
    Once you have cut it out also cut an sole from some thin cardboard so we can use it
    as a support while the fondant is drying. You will also need to cut a couple of other
    things out of cardboard and staple them together where shown.
    Place a stack of books on a baking tray and using your template for the side profile of
    the shoe match them up to the right height and then open the cover of the top book and
    prop it up to the right angle using tissues or paper towel inside the book.
    Then take the cardboard sole and bend it to match the side profile of the shoe, set it
    up on the books and tape it into place.
    Take some non-stick baking paper and place that over the top so that the fondant doesn't
    stick to the template.
    Now to make your buckle, place some baking paper over your template and roll out a thin
    even snake out of black fondant. Then using a knife to help you bend the corners to match
    outer size of the template, trim it to the right size and join the two ends together
    in the middle of one of the sides. Then use an off cut to make the prong of the buckle.
    Then take a dry paintbrush and dust that fondant with silver luster dust on all the edges and
    then leave the buckle to one side to dry.
    Next to make our label roll out some white fondant really thinly, put your template over
    the top and cut out the rectangle shape. Next take a sharp pencil and trace over the letters
    of the logo pressing reasonably firmly. When you remove the paper you will be able to see
    a light indent that will guide you to where to put the letters. You can either paint them
    on using black gel food colour or you can use an edible marker to write them on.
    To be honest I had never heard of Jimmy Choo before making this cake, I just searched for
    expensive shoe brands and found one that I thought would look pretty on a cake. If you
    want someone who does know a lot about fashion and make up then check out beautiful Carah's
    channel, her channel is called Carah Amelie she has studied apparel design and cosmetology
    and has been a licensed cosmetologist for the last
    She has heaps of great get ready with me videos and skin care, hair and makeup tutorials and
    some creative hair ups. As always I'll put a link in the description below the video
    and I'll add one to her channel at the end of this video as well so, make sure you check
    it out and let her know in the comments that 'how to cook that' sent you over.
    Next roll out some black fondant to be half a centimeter thick and cut around the outer
    sole template line. After you've cut it run the flat edge of your knife around it to smooth
    off any imperfections.
    Roll out some cream fondant and cut the inner sole template size.
    Rub a tiny amount of water onto the black sole and add the cream sole over the top,
    if it stretches a little as you add it like mine did add your template back over the top
    and trim it to shape.
    Take your toe template and trim across the cream toes section and remove that bit.
    Line up your fondant sole with the sole that we made out of cardboard and put it into place
    so that it is going to dry in the right shape. Dab a little bit of water on the top section
    and add your label. Take the tip of a knife and gently make stitching indents across the
    top and base of the label.
    You can see here the sole has little crease marks in the fondant at the bend, if you want
    to avoid that put the black sole onto the support first and then add the cream sole
    once it is in place.
    Now to make the toe. This shoe uses snake skin, you can buy expensive
    snake skin texture mats but here I ma just going o use a plastic texture mat that I use
    for chocolate as well. You get all of these texture mats in the back of one book, whenever
    I mention them in a video people always ask what was the book and where did you get it
    from so I will put a link to that particular one in the description below the video so
    you know which one it is it costs about $8 for the book.
    Roll out your black fondant and then place a texture mat over the top and roll over it
    to make the imprint on the fondant, then remove the template. Then using the toe template
    cut along the top of the toe shape of it but leave the rest of it. Add it to the toe lining
    it up with the cream shoe lining. And then use your finger to smooth it down and around
    the toe and trim it off at the base.
    The top angle of the heel to match the base of the shoe angle so they can join together
    nicely. So to make that take a thin book and prop it open so that it matches to side profile
    of the heel that I have given you. Then add the heel template and double check the angle
    is correct and tape it into place.
    Roll out a thick snake of black fondant and then using the palm of your hand push down
    on one side as you roll to make it skinny one one side. Place it on the template and
    then roll it some more until it matches the shape. Use a knife to cut the angle of the
    top of the heel then mold to the right shape using your fingers.
    Do you know how much these shoes actually costs to buy? the real one I mean not the
    cake. Let me know what you think in the comments below how expensive is too expensive for a
    shoe and do you have a favourite shoe brand that you like to wear?
    Trim the end of the heel using a knife and then make an indent at the base of the heel.
    Next we are going to make the ankle strap roll out some black fondant add a thin layer
    of cream to the underside and then rub the texture mat on the black side of it.
    Using the ankle strap template cut out a long strip and wrap it around your cardboard support
    that is covered in baking paper. Then using the back of a knife make two indents near
    the end of the strap and add your buckle into place. Use a tooth pick to make a hole and
    then add the other piece into the hole. So that it looks like this.
    After a couple of days once those pieces are dry take a some black fondant and using the
    back of a spoon mix into a thick paste with a little water. Use the paste to glue the
    heel to the shoe. If you are in a hurry you can mix some tylose powder into your fondant
    to make these pieces set faster but that also means you need to work faster when making
    your shapes.
    Use something to support the shoe while it sets and leave it to set for an hour you can
    be work on your actual cake while you wait for this or if you are making it ahead then
    just take a break.
    Roll a snake out of black fondant and add it to the underside of the shoe where the
    heel joins the sole and smooth it around, then trim off the excess.
    Take a toothpick and poke it into the shoe on almost an upright angle. Then sit the cardboard
    support over the top.
    Roll out some black and some then some thin cream fondant. Using a tiny bit of water put
    the cream onto the black, then flip it over and rub the texture mat on top. Cut it out
    using the template.
    Use your knife to indent down the back in two straight lines and then use the very tip
    of the knife to make stitching marks down the middle.
    Add a little water along the base and put into place resting it on the card. Now I should
    have covered the card here in baking paper because my fondant stuck when I tried to take
    it off so make sure you don't forget to add the baking paper.
    Next to make the lower strap roll the black and cream fondant just like we have before
    but this time you don't need the texture mat because this bit is made out of satin. Cut
    out the shape and you can use a roll of card here or bunch of tissues might be easier.
    Rest the strap over the top and join it at each side using a little water.
    Repeat that process for the middle strap adding some tissues for support. Measure using you
    template to make sure they are the right size and then add the fondant strap dampening the
    ends with a little water. Carefully line up the edge and gently push it into place. And
    yes you guessed it leave it out to dry, now this fondant is only thin and it was a really
    hot day here so i was able to take the supports away after a couple of hours but to be safe
    I'd suggest you leave it longer. If you keep one of your strap off cuts you can use that
    to see if it is dry enough you can test it and see if it will hold its shape.
    Carefully remove the back support and then stack up some items to make supports of equal
    height to balance a ruler on. This is to hold the ankle strap in place while it sets.
    Then add some of your black paste and loop it around the back of the shoe, with the buckle
    on one side towards the back.
    You could leave this shoe just like that or customize it and add your own decorations
    like flowers or whatever the birthday girl likes.
    But we are going to continue to decorate it like the Jimmy Choo shoe, so to do that remove
    your other supports and using your template make your centre vertical strap just like
    we made the others. Slightly dampen the top of the strap and then the top of the bottom
    two loops that are on the shoe.
    Attach it underneath the ankle strap and over the other two loops. Now to make our razor
    sequins that decorate the shoe. Staring with the black cut a thin strip, segment it and
    cut one end into a point. Add a little water and gently place them onto the shoe. Make
    another layer that overlaps the first and then repeat that going up the shoe changing
    to blue then greens and then back to the black. Then we want to leave that to dry out, the
    longer you leave it the stronger the shoe will be.
    For the pillow cake itself bake 4 quantities of my red velvet cup cake recipe in a tray
    and then let them cool. Trim off the edges and then make yourself a square template that
    you can use, mine is
    Put a smear of cream cheese frosting onto the base and cut a square of cake and add
    it to the cake board. Add a thin layer of cream cheese frosting, each time you cut a
    square you are left with off cuts that you can join two of those together to make another
    square so you can use those for alternate layers. Use your knife to level them off if
    they are not quite even. Add another layer of cream cheese frosting and continue to stack
    the cakes up in this way.
    My red velvet cake recipe and the frosting recipes are all on the blog howtocookthat.net
    if you go to the shoe cake page which is in the link below this video I will link to all
    the recipes that you need from there.
    Keep going until it is around 8 cm tall. When we carve the top of the cake we want to come
    down just past half way down to about 3cm we don't want it exactly in the middle because
    pillows squash down when you put them down on something.
    Fold your square template in half and then in half again to make a smaller square and
    place that in the centre of your cake. Starting with the corners carve down on an angle down
    through the layers to the 3 cm level that we looked at not right down to the bottom.
    Then repeat that on each of the corners and then on each of the sides, cutting down on
    an angle just down to the
    Next use your knife to shave off thin layers of cake at a time to round off your pillow,
    we don't want hard angles. We don't want it to look like a rock we want it to look like
    a soft pillow. So round it up to the top. Then looking at
    your cake from above curve it in slightly at the sides. Not too much just a little bit.
    Now for the underneath, from just below that
    cake board at each corner and then along the sides.
    Next the key to making it look soft and pillow like is giving it some creases. Grab a pillow
    and have a look at how it sits and where the creases are. Using your knife take some chunks
    out of the sides to give it that look. If you don't do this your pillow will look a
    bit solid.
    Clean up all of your crumbs and then cover the whole cake in frosting and put in the
    fridge to firm up. I am using the cream cheese frosting on the outside here too, it is quite
    a soft frosting so if you are new to cake decorating I suggest you use one of the buttercream
    recipes on the website instead for the outside just to make it a bit easier for yourself.
    Roll out some fondant in the colour that you want your pillow to be and cut a long strip.
    Place it under one side and press it onto the frosting. Using scissors trim it at the
    corners and long the cake at the 3 cm level. Repeat that on each side and then cover the
    top of the cake in fondant, you can use a contrasting colour here or you could rub it
    with a texture mat you can use whatever you want to customise your pillow. Then use a
    ball of fondant to smooth out the fondant and push it into those creases that we made.
    Then run your finger along to find the edge of the bottom fondant and trim it up using
    your scissors.
    Next to make the edging you can do that by hand by rolling two snakes for fondant and
    twisting them together. Or you can use a fondant extruder with a plate that looks like this
    one. I will link you to where I bought this one online in the description below the video
    I have only recently bought one and they are very handy. You just roll out the fondant
    into a thick snake, place it into the tube, screw the end and then turn the handle and
    it pushes the fondant out. Then for this pattern I want you to twist the cord in opposite directions
    on each end so that it looks like cord. Then take some gold luster dust and brush it on
    using a paint brush. Add some water along the edge of your pillow and put some cord
    on using toothpicks to hold it in place while that water fuses it to the side of the cake.
    Then using the fondant extruder again fitted with the small circle tip squeeze out some
    thin spaghetti looking pieces of fondant , dust them with gold, twist the top and place them
    onto the corners of the cake.
    Remove your toothpicks. Then measure roughly where the shoe will sit and make a little
    indent on the cake, this helps the shoe sit securely but also makes the pillow look soft
    because if you put something on a soft pillow it sinks down into it a little bit. Then add
    your shoe on top and your cake is ready to serve.
    Thanks for watching, you can put your requests in the comments below and subscribe for more
    cake tutorials, chocolate decorating lessons and desserts. Don't forget to check out Carahs
    channel and tell her how to cook that sent you. Have a great week and I'll see you next
    Friday.
    [music The Boat Song by youtube.com/setsailtv] *** *** Fondant High Heel Shoe Tutorial - YouTube !!!
    hello are showing their and my husband Roland on cake supplies for stock com
    or professional cake decorating inspectors an
    Food Network he's OK
    you okay so I have some gumpaste hear that
    pink I'm gonna make up pink high heel today and the first thing I'm just gonna
    roll it out
    I had to make one and a little thinner so it kinda conforms to
    shape the high heel mold here and you're gonna want the smoothest
    section to go down into the mall because you don't want any creases
    in your high heel something out look to make sure got my smoothies pieces
    going down and I'm just gonna press it
    down to the mall and then I'm just going to
    flatten it out here middle kinda
    Bazar pressing down on it all myself trams and weighing see where Howard
    kinda pulls away their at
    use my palette knife to trim it I'll cleaner
    kinda going from hands right now once again if
    fairly well tram by but a little bit a vegetable oil spray
    on here and then I just run over and get a nice and smooth because this part will
    show
    so you want it you don't increase is ur dance in it either
    then I'm gonna put it in the freezer for about
    to
    minutes until it's easy
    to
    take out at the mall taken them all down to the freezer now on I
    setup
    from the gumpaste scam pulled away and all the spots here
    his hand and to go my campaign just
    train after shape it is you're getting out of here
    to their I have it removed from the mall have done as I have a piece of waxed
    paper here
    this is an issue perhaps but it's got their soul is going to dry on
    so that I get my heel to dry it the same angle
    I'm watching this upside down leave around here on the wax paper for the
    top of the hill to set on
    clean that up against here and i wanna make sure
    at the height of the heel comes all the way up to hear
    and then as it starts to try I'm gonna
    press it up here and then but it formed out onto the wax paper and that'll make
    the
    heal up here for right into the angle of the ramp as the sole goes down so
    just wanna make sure it's the full length and that its
    at that your heel is straight and I would actually let that he'll try for a
    couple of days
    so now I want to set up my soldiering ramp
    and the deal goes back here I wanna act set this up for
    putting the parts together and it's not in the instructions the written
    instructions for what
    what I like to do is take one of those extra pieces of Styrofoam
    that was in the package and
    towards the front of it I want to
    take a couple of needles are core size pans and I'm gonna attach this to this
    I want it to be at so that it's at Marvin Inc buying because the way that
    he ok I'll post back
    and I want it the weight to be more forward
    so the next thing I want to do as I'm gonna sit right here on here
    and I have a double a strip I'll
    I'll wax paper is just a stripped I folded
    and I'm going to put the heel on here
    and and put this
    my ski for process yes to secure it in place where r
    on it and I'm using questions for this because
    turn out as long combat where they won't go through the other side
    but you could use course I can secure
    know that supporting the heel I'm not a cut out my soul
    now you see what I mean by AV angle that I had that our
    you see the angle of the heel comes right down
    into this and if you didn't try it
    the way that I said it might have om some down song and might not
    stay at the same same height as this self so I have my gum paste
    rolled out and you want it %ah fairly thick for this
    hand I say mmm probably need to finance are so thick
    because you want it to be %uh thick enough that
    when it's dry it's going to support the yeah
    the rest issue so and then I'm going here's the
    soul cutter that came with a shoe cat and just put on
    piece that I rolled out here
    and passed by some for me and get
    a nice clean cat came away the excess
    and I'll bring me and my
    still support that i said after layer
    gonna rush a little bit of water
    on the hero and I'm going to attach
    my soul here and depending on where the on a left or right sure you can
    flip it over just plan on here
    lineup signs of it
    and make sure that that so is not functioning
    are theirs and Patel here
    roughly here
    supports gonna make sure it doesn't text and Pascack
    is it wouldn't have the right angle vans and
    scale back their and then I when just let that dry and again
    a couple a days you wanna let that dry so that it's nice and sturdy and make
    sure it conforms and all the shape here
    soon after the install I just wanna cut out just like I did for
    the sole issue actually
    to the lining up in Seoul is what I'm gonna do here
    got away now this you want to be a little bit smaller
    and be past seoul some and then just move and just a tiny bit on each side
    not going to worry about the toll toe or the heel at this time
    so just wanna tramway a little bit there
    and I'll do the same thing on the other side of this move and just a little bit
    and then I'm just gonna manually trim a little bit of a rough day he all
    don't have to worry about it ok I'm gonna cut away majority are
    tell section anyway as this is the part that doesn't go all the way down
    in this you and you'll see what I mean in a minute
    and then around the the where the ball up to
    but would be you want to make it cut
    across and cut of this scope portion
    once I've got that K how I want across their
    I want to take a little stitching to all yeah and they said the design we or two
    about we have
    and I'm just gonna go just in just a tiny to catch
    and right close to the edge just make a little stitching line
    and this will make it look like where it stitched
    to be and solve issue
    so I fought back in my shoe trying ramps wifi so long he owe on their
    and I'm gonna have just a little bit of water on
    my in Seoul liner
    so that it attach as well want to move again just a little bit on the side in
    the back there so
    next I wanna have the heel strap and I've used a template here the hill strip
    template to cut out a piece of my gum paste
    and I brought in the dried soul and so liner
    that was attached the he of then I wanna take one other little heel strap
    supports there were
    in the kit I run at kearsarge can
    towards the very back up that and then just behind that
    am so liner I'm going to at
    answered the pan there and then just move that support
    down on time make that pose inconspicuous as possible but that keeps
    the hill support in place and i wanna add just a little bit of water with the
    brush here
    on the very base up this hill strap parents going to touch
    he'll section there and
    want to line it up so that it's going to be
    equal on both sides come down the same distance
    you had also wind it up so that it sets just
    above the heel speed don't see where the soloist there
    okay now I've got my open toe strap
    kut teh the template also included in the kit
    and I want to bring in the resin
    toe former that I have and
    said it here I want to say that just up a little bit on this
    and so liner so that when I go to take it out it doesn't get caught
    Karen snacks on a set up there just a little bit
    yeah I can I'm going to dampened
    base lining up here with just a little bit of water so I'm using
    handset over that so position at work
    want it
    just attach it down to be
    so all you shape it how you want it so that it
    credit Rory so here's the issue after and let it
    %ah dry I couple a days and
    all I've done is take a off on an extruder
    and extruded up a smaller stuff that but
    the round openings that come with it add a little water on the edge of the
    tow strap and attached it on there and i cant
    how to decorate these anyway that I want I
    here I've got just a couple strips on a white on a pink
    that I kinda made into a little bow added some of the pics to your disco
    dust on there that makes a real pretty
    little tell decoration or you could use
    %ah just any kind of a
    a whole and I have a used them all here
    Justin white gum paste and then added some %uh they
    in some sparkly dust on there are really here
    pagination as all that limit you on these because you can
    make closed toed shoes %uh you can make slingback so
    leave off the back in at all kinds of different decorations
    I using this great kid have fun trying out all the different
    I kill styles *** *** Gumpaste Shoes For Cupcakes Tutorial - YouTube !!!
    hi well selling hats a small head
    she said decides we can meet
    yes make this come she's of me
    campaigns fun pink when I friedman
    right because I he's coming days
    just words colors
    Peter to Hills
    me oh man and I'm
    just cast it's cool that has a shop planes
    way his just anyway
    pain send
    okay and paintbrushes
    pay on the day claim small cuts on
    he's gonna on fire slow sound judgment
    shame feels as me template
    past she US-made good
    link he sounded say it was impossible
    account US had Sony
    denying it she
    sometimes a and
    she okay all energy has flown up campaigns
    too fast me one minute about one and a half points
    you voted
    Sony and place it on the company's
    and then he's which is income RAM
    kid me and
    there okay okay left castle
    she so images %uh to create
    the right and she I think
    and his friend on any yes now said
    me them and th
    so I have Hayes need a had get Lunati
    whose down and stalking
    into the cracks soon create a the deep in the shade
    who can commit I am going to be happy stake
    I haven't had them now I have really easy into any
    shade and wouldn't let morning
    peace that Mimi
    a and then you want to get the peace feeling and
    cut yes yea
    out and
    yes me
    so and hallucinating
    is owned is inside you in whose
    you up to just
    little does lame he said ski
    she Yankees its souls
    thing commonly used a
    spring in you she told you she
    trying including
    mentee and myself
    flashy and just acid
    back and
    beleaguered at now told the shade and
    backup Shea on pink he said you
    yes so easy Scott
    chief she and she she's he didn't
    click the mouse Metro say anti the same
    me whose me hot bikini
    cut these out it didn't make a smoothie the training and in a sense okay
    be and about
    recency say be quite nice
    me on the top and
    cut cable popping and locking makes me that
    Nazi so that my me okay and
    Takahashi what we must do is
    adults he's a
    mind
    mondaq you know to you she's
    tryin in cement quick thing said it would decide
    Shane and all shaking Miami
    contain any she came I missed out on the fun
    she's we once a day is
    signs pain
    handle it and
    taken from you see Gracie on signed
    morning and
    just rack the phantom and
    just hold it in place clinically stuff stick
    and that's awesome
    she me
    and pay it back on Wednesday
    he's racks
    glynn I'm tiny
    line billion just on the bottom of the hell
    and then iraq's that
    around shame
    and I'm Wed you have been trying
    just that City can
    carry on time fish shaking and

    and basement Shane
    apology say track and
    for about
    minutes until late yesterday and before you
    a hands-on because in the Med she saw
    and capturing to really face
    time okay nazis party time
    Wednesday servicemen's and
    I'm in the hills shame this
    for me smoke pot
    and wants to make achieve goals
    yes know what Wednesday
    he's she push the ball
    and chill is what excites fans
    back fishing and then
    lesson that both dams
    me
    name Wednesday on the side and
    so mowing
    and
    these integrated stay
    ski can here maiti be an excellent
    and my house me thanks
    don't worry about linda them and then we can accompany them
    that correct size that chase
    and then Wednesday claim
    but
    do on the back the same Stan
    and its holding he'd
    face and then
    what he was doing he's try what happened with me
    where his just
    now and then it wouldn't it be nice
    okay decoration she's say
    and only somewhat
    campaign see how it comes out can't and then
    mole you
    layhee no way can't just say that their
    and passage down and and
    calcutta she's incumbents
    and pool that new
    fam Makena missed
    you can family is Orsino
    but some from men take
    she's tiny bit

    and
    Eastern get
    downsizing the same here yet
    netcom until she's
    ready for the cupcakes Adams I'm really hoping joins
    tell and and pick up pace
    facts these say and
    and other K make me my
    no case finds K *** *** How to make LITTLE FELT BABY SHOES. - YouTube !!! *** *** Fondant cake decorating - How to make baby sneaker shoe - YouTube !!!
    hi everybody today I'm gonna show you how to do this cute Converse shoes
    and they're perfect for baby shower dessert cake
    to really cute and so easy to do still enjoy the video
    okay hi everybody so
    you're ready to start the project what you need to do it cut out the template
    at the little pieces out I like in this case you need to pieces that's the only
    piece
    doubt you will need I'm to cut twice cuz
    and its obviously decides that make sure your diet you do
    I'm do I'm one piece a bit and then
    forever stand on duty at a piece are asking to have two sides to same
    I'm site and you don't want that so
    I also of these little lines that you see
    in all my pieces another template you need to create them
    at numerous ways up doing that you can use a knife
    a toothpick I also this peace right here
    distill is really cool and it does I 55 at the same time
    this actually
    and scraper
    so I bother psychopharmacol one dollar
    just goes easier and I'm it makes
    I 5 little ones at the same time to create a little
    holes like so I'm very very easy the trick is to use
    a ass shot and then you press down and then you get those
    holes so I am by the way
    number
    up to template that's gonna be coloring okay
    and also the little star that's gonna be a colouring
    for your shoe whatever County making and
    all the other numbers which is I'll
    time
    and sixth
    or going to be I am
    here white pieces so I'm just gonna finish cutting my pieces
    now be right back
    have cut all your pieces you're ready to put your project together
    so take number three and number four
    and that's what you gonna arm stick
    together first so using your passion just a little bit of water
    put some I just a little bit of water on the at
    up number
    I'm together so
    you don't need to use edible
    I'm this works perfectly fine
    so see there you go that once you've have this you have something like that
    looking like that
    dad take your number
    okay just like so for think that and
    in a friend you gonna use a little bit of water
    began and to a little bit of water
    and then feel attach arm
    of pieces together jet lag so
    and a contest and a
    up a little bit there you go see
    because this is the front have to show went to in effect right now
    there you go some old it just a little bit play with that
    and there you go
    then once
    arm you burn fat and you're ready to do two sides
    the side and East pieces three here so
    what you do again just a little bit of water
    Ali around and on the side and again
    other way around on the site you can occur
    can attach here
    little piece right here and a letter check that you can do
    this put them together because this right here is going to be the backup
    your show
    it just gives you guideline have
    where to and placed an not
    for you to have a kit kat there you go
    see and a new place Tampa like bad
    and then peaches
    I'm play with their and tell
    you get the shape that you want see right here a militant leader
    more water right here friend and
    day go just like fell
    and then you do that on both sides I finished
    of a not be right back
    okay some other your side are attached you had to
    I the front the telling and the Bhakti telling
    and finishing and details
    so basically its numbers thanks and number

    let pat what number six and her friend just got a little bit of water
    and taking numbers six and and just put it
    on top okay

    there you go
    and then do the same thing with number

    I'm put are little water all the way around the issue
    and a taken under

    making sure that decreases her on top
    and then you go following around hand and a recall so this
    gifts to you tonight finishing touch
    okay and then
    dare you go features make
    showed up everything else me and don't be afraid of my
    even putting your finger and phantom all that okay
    Monday %uh and I'm
    ample even into you and take
    here number
    universal it together and you can create something like that and then
    this this can't be year attach for to back
    just like fell okay
    there you go so I'm just gonna let that dry
    a little bit and then you gonna continue
    guess I wanted let it dry mom for a little bit
    I'm you gonna go ahead and do delays
    I already did that for you so I
    once you standout EU than a common attach your local
    sound to spur your arm peace
    on top earth the arm a white pond on
    and and political hotter again and you just come
    and attach it just like so I
    and there you go Alito track arm that I have
    in order to do armed is shoes
    and that you dont I'm have difficulties once you've cut your pieces
    let them set a little bit arm for a couple of minutes
    soda the font on is kinda hard in and ends
    easier for you to arm good
    the pieces together so anyways
    I hope you enjoyed this video *** *** Fondant cake decorating - How to make baby girls shoe - YouTube !!!
    hi everybody today i'ma show you how to do this really cute cake pop
    for
    hope you enjoy this video
    so what you need to do first
    your template number when in Membertou
    and make sure that her this peace
    you never ever sit on the other side or else you gonna have to rate feet
    and then using this tool right here that cuts are you can also use
    a little short made after rolling your fun time
    you were going to cut just like so
    fear using your
    unit cut your funds aren't only around
    to state that make sure that your
    following the lines and
    chided duties Eschete its passable
    okay so once you've cut all your pieces I what you need to do you think the back
    of your
    brash you would create to creases when in the middle ray here
    and when at ID and
    great here and this is basically your attach
    like that you can leave it the way it is just like that
    and you can and put all your pieces together but
    what I would say the chassis it's just go but not
    you can use that tool like this or
    this one I prefer this one it's by will turn
    and the reason why I prefer this one is because it's smaller and missus
    cuter so what I wanted to do at this point
    is basically just go all year round your pistes
    and see how cute assists and it's going to create
    something I it's cute affect as if they were so
    its and there you go you have an entire place yet
    phased-in you let them set aside for these half an hour
    and the reason why do that is because they come a little bit
    harder and its easier to mold
    into your the bottom I've you're shooting
    look-see issue it's already getting hard
    so its easier to work with
    now what you will need: fares you could work with water
    no problem because the water in contact with farm dont
    I'm becomes like glue but you can also buy
    edible glue and this one's made by wealth and
    and it's really worth it I'm because it basically
    clues right away so what you gonna do
    as you're going to put a little bit
    Africa who all over way around here shoe
    just think that that
    not a lot just a little bit also crazy on the computer or the water
    and then you gonna take issue and this is the front
    abuse you and remember what I told you cut
    one piece like that with your template don't forget to turn around and do your
    either side her ass you b-stock with to
    side an eel understand what I mean
    in a minute and then
    basically what you do as it just to mold
    issue other way around
    the bottom
    hard just think that not on top just at the bottom
    and don't be scared if fingers and their
    make sure that it's getting molded
    and see how it holds properly if it doesn't hold you can also put
    cut tile wallpaper for wax paper inside little pieces
    so that you get that may shape if you follow my instructions
    book see it's holding on his own and is not breaking
    soul right here in the put just a tiny
    that both edible grew
    again cuz
    here Ruth
    and its here
    and see
    faiths in you have
    you there soon and you can motivate
    keep me from the way that
    their ego
    then you happy little cute she'll
    already finished away and way here
    surely am I'm you
    there's numerous ways of doing it you can put a flower recant their little bow
    this matter it's up to you really I am
    but I put a little flower in right here have put the little
    attached to you can also for a little pearl
    or
    really matters
    up to your creativity and remember I told you
    one side you have to flip this is what I mean
    get past is right here India patch
    is right there but ask you can I have two-shoes like this
    here that you don't want that because obviously
    we have alright and collapse for its
    sup I really hope you enjoyed this cute
    easy tutorial *** *** Mini Fondant High Heel Shoe - How To With The Icing Artist - YouTube !!! Add subtitles/CC
    at Murray and i cant
    and adapt and I think today anguish
    have any is little often shoes perfecting on top kayak
    or and like locate and
    she had it for events I'll she'll using one-time thing and one of them
    of she have a cure own on so that we can get
    shake this year should said to make the moms you just gonna take some funds and
    into a muscle block sheep and then smashed down with your hands
    now this is going to create the curve that year she was gonna set on curve
    into this shape
    like but some pink fondant and then cut the SOL
    have your share I will be putting bad the templates that I'm using
    in this video in my description below that you can cut in use for your
    own cake think at the front at the issue
    as well as the back at the issue now for the liner just roll out some white
    Ponting
    and then cut that out as well make sure all if your edges
    a release may use and then test that was something class today past
    you can use a toothpick to do this
    im just gonna create some stage lines I miss you and then put that into place
    is a little bit of water
    in to stick on the back if your ship and just squish Downey
    and I feel really help at this kinda into place in smashed am
    at the edges though it lacks almost seem less you can spare liner on
    and then put your front strap on the same as you did your back
    wrote your he elrich gonna write some pink fondant into a worm shape but the
    flap patch
    cut it to a rap length for now we can go to a final Inc
    after and just ask that was something clustered
    just and append little bow on the front of my shoes Angus
    cut-out little rectangle shape cut in on the meadow
    and then just wrapped up with another piece
    a Fontan test with Leicester desperado ronit and then at
    is ready to go on the front air show for the red strap issue
    cut out the song and have some tech fontaine and then rather find it a
    little bit center for the details
    well a rectangle use there back at the shoot the template
    as a guideline how long we're gonna need tests
    and then cut it to you centerpieces
    and then that's gonna be for the straps make sure that your mold is very well
    dusted certainly nothing sticks to it
    pinsky is a white liner again
    input that into place the little bit of water
    and I ready to put the back this year on
    use a little piece a paper towel to help
    prop the straps up and these are just gonna need to dry and then you remove
    the peace papers how they'll stand up fine on their own
    i love u shoes will need to try it for a couple days before you put the heels on
    for my black pointed shoes used to so i cud
    just point the address the issue a little bit more kinda a black triangle
    proud of the one edge
    and then when one hedge and then cut into the aether light up
    annie is the same
    backing as I did for my first show and then you ready to put the telethon
    I'm gonna put a little bit evergreen flower
    on the front of the issue I'm skis small flower cutter
    his little water in past and to place
    now for the picture this one's a little bit more difficult you can use
    the liner template and you're gonna cut rounded
    in this kind of shape and then cut out the middle
    and the soul is gonna be at the black template and then just point to tell a
    little bit
    water around I love the edges and then
    place the pink that pink part of it on top
    and smash in the edges kept the and and then put that together
    and I can append little bow on the back a bit for an extra detail
    once it's dry and annie is an ad about black marker and his pet lucky polka
    dots
    when you ready but the heels on
    just cut them to link put a little bit of water can I find if you
    moved the hill around a little bit and that'll actually help its tech
    batter and that's all done
    ready to go on your cake you know you can make
    any kind you might speak of steps you
    I have how a lot I'm creating your
    own favorite she is and I hope you really interesting tax time
    back *** ***


    click here

  • click here

  • click here


  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here

  • click here